2008 Model	Lug	Track	Stud	Stud	Shaper Bars		Round Bars
	Height	Length	Length	Qty
Bearcat WideTrack	1.000	20 x 156	1.080	93	CAT-S2264-45	-	CAT-R2264-40
Bearcat WT Turbo/Art.	1.250	20 x 156	1.375	124	CAT-S2264-45	-	CAT-R2264-40
Bearcat 570	1.000	16 x 156	1.080	124	CAT-S2264-45	-	CAT-R2264-40
Crossfire 5/6	1.250	15 x 136	1.375	162	CAT-S2264-60	-	CAT-R2264-60
Crossfire 8/1000	1.250	15 x 136	1.375	180	CAT-S2264-60	-	CAT-R2264-60
Crossfire 8/1000SnoPro	1.250	15 x 136	1.375	180	CAT-S2264-60	-	CAT-R2264-60
F5/F6 & LXR	1.000	15 x 128	1.080	136	CAT-S2264-60	-	CAT-R2264-60
F6 Sno Pro	1.250	15 x 128	1.375	136	CAT-S2264-60	-	CAT-R2264-60
F8/F1000 & LXR	1.000	15 x 128	1.080	153	CAT-S2264-60	-	CAT-R2264-60
F8/F1000 Sno-Pros	1.250	15 x 128	1.375	153	CAT-S2264-60	-	CAT-R2264-60
Jaguar Z1	1.000	15 x 128	1.080	153	CAT-S2264-60	-	CAT-R2264-60
Panther 370	1.000	15 x 136	1.080	81	CAT-S2264-45	-	CAT-R2264-40
Panther 660	1.000	15 x 136	1.080	108	CAT-S2264-60	-	CAT-R2264-60
M6	2.250	15 x 153	N/A	N/A	CAT-S2264-60	-	CAT-R2264-60
M8/Sno Pro 153-162	2.250	15 x 162	N/A	N/A	CAT-S2264-60	-	CAT-R2264-60
M1000/SnoPro 153/162	2.250	15 x 162	N/A	N/A	CAT-S2264-60	-	CAT-R2264-60
T500	1.000	15 x 144	1.080	114	CAT-S2264-45	-	CAT-R2264-60
T570	1.000	15 x 144	1.080	114	CAT-S2264-45	-	CAT-R2264-60
T Z1 / LXR	1.000	15 x 144	1.080	114	CAT-S2264-60	-	CAT-R2264-60
F570	1.000	15 x 128	1.080	102	CAT-S2264-60	-	CAT-R2264-60
120	.500	10 X 68	N/A	N/A	N/A	-	CAT-R2217-40

*121” Tracks Have 48 Lugs /128” Tracks Have 51 Lugs/ 136” Tracks Have 54 Lugs / 144” Tracks Have 57 Lugs /156” Tracks Have 62 Lugs


* TO ADD THE NEW “DEUCE” BARS TO YOUR SLED, SIMPLY SUBSTITUTE THE “R” (round bars) OR THE “S” (shaper bars)
WITH A “D” FOR “DEUCE” BARS IN THE PART NUMBER

** PLEASE REMEMBER THAT “DEUCE” BARS ARE SOLD AS SINGLE BARS – NOT AS A PAIR

Liberty Products, Inc. recommends that tunnel and/or heat exchanger protection be installed in all snowmobiles when traction products are utilized. Even if your snowmobile is equipped with factory tunnel protection we suggest that you check for adequate clearance of traction products before you ride. Riding without performing a clearance check can result in serious damage to your snowmobile. Stud quantity and carbide length must be balanced for safe and proper handling. If you are not using studs do not install overly aggressive wearbars. We recommend our “Super-Stock” or “Switch-Back” series.