|
2002 Arctic Cat Application Chart -
Safety / Trail
| 2002 Model |
Lug |
Track |
Stud |
Stud |
Carbide Wearbar |
Order # |
| |
Height |
Length |
Length |
Qty |
|
|
| Bearcat 550 WT |
1.000 |
20x156 |
1.080 |
93 |
SS 4" |
2179-00 |
| Panther 440 |
.750 |
15x136 |
.875 |
81 |
SS 4" |
2179-00 |
| Panther 570 ESR/R |
.750 |
15x136 |
.875 |
108 |
SS4" |
2179-00 |
| Pantera 550 |
.750 |
15x136 |
.875 |
108 |
SS4" |
2179-00 |
| Pantera 600/800 EFI |
.750 |
15x136 |
.875 |
108 |
SB6" |
2093-00 |
| Mountain Cat 500 |
1.600 |
15x136 |
1.625 |
108 |
SS4" |
2179-00 |
| Mountain Cat 570 |
1.400 |
15x136 |
1.625 |
108 |
SS4" |
2179-00 |
| Mountain Cat 600/EFI |
2.000 |
15x136 |
NA |
NA |
SS4" |
2179-00 |
| Mountain Cat 800/EFI |
2.000 |
15x144 |
NA |
NA |
SB6" |
2093-00 |
| Mountain Cat 1000 |
2.000 |
15x151 |
NA |
NA |
SB6" |
2093-00 |
| Thunder Cat / ZRT 600 |
1.000 |
15x121 |
1.080 |
144/168 |
SB6" |
2093-00 |
| ZR 120 |
.500 |
11x68 |
TBA |
TBA |
SS4" |
2216-00 |
| Z 370/ES |
.750 |
15x121 |
.875 |
72/96 |
SS4" |
2179-00 |
| Z 440/ES |
.750 |
15x121 |
.875 |
96 |
SS4" |
2179-00 |
| Z 570/SS/ESR |
.850 |
15x121 |
1.000 |
96/120 |
SS4" |
2179-00 |
| ZL500 |
1.000 |
15x121 |
1.080 |
96/120 |
SS4" |
2179-00 |
| ZL 500/ESR |
1.000 |
15x121 |
1.080 |
96/120 |
SS4" |
2179-00 |
| ZL600/EFI/ESR/SS |
1.000 |
15x121 |
1.080 |
120/144 |
SB6" |
2093-00 |
| ZL800/EFI/ESR/SS |
1.000 |
15x121 |
1.080 |
144/168 |
SB6" |
2093-00 |
| ZR 500/EFI |
.850 |
15x121 |
1.000 |
96/120 |
SS4" |
2263-00 |
| ZR 600 /EFI |
.850 |
15x121 |
1.000 |
120/144 |
SB6" |
2264-00 |
| ZR 800/EFI |
1.000 |
15x121 |
1.080 |
144/168 |
SB6" |
2264-00 |
| ZR 800/600/500/Cross |
1.250 |
15x121 |
1.375 |
144/168 |
SB6" |
2264-00 |
| Country Edition |
|
|
|
(500)96 |
|
|
| 4 Stroke Touring |
1.000 |
15x136 |
1.080 |
108 |
SS4" |
2179-00 |
| 4 Stroke Trail |
1.000 |
15x121 |
1.080 |
96 |
SS4" |
2179-00 |
** 121" Tracks
have 48 lugs / 136" tracks have 54 lugs / 144" tracks have 57 lugs / 156"
tracks have 62 lugs.
SB 6" = Switch Back 6"
SS 4" = Super Stock 4"
Liberty Products Inc. recommends that tunnel and
or heat exchanger protection be installed in all snowmobiles when
traction products are utilized. even if your snowmobile is
equipped with factory tunnel protection we suggest that you check
for adequate clearance of traction products before you ride.
riding without performing a clearance check can result in serious
damage to your snowmobile. Stud Quantity and carbide length must
be balanced for safe and proper handling. If you not using studs
do not install overly aggressive wearbars. We recommend our "
Super Stock " or " Switch Back" series.
|
