Stud Boy A Leader in Snowmobile Traction & Control Products


 

 

1999 Arctic Cat Application Chart - Performance / Aggressive

1999 Model Lug Track Stud Stud Carbide Wearbar Order #
  Height Length Length Qty    
Bearcat 340 .750 15x136 .875 108 Switch-Back 6” 2077-00
Bearcat 440-I .920 15x136 .875 108 Switch-Back 6” 2093-00
Bearcat 440-II 1.000 16x156 .875 108 Switch-Back 6” 2093-00
Bearcat 550 WT 1.000 20x156 1.000 124 Switch-Back 6” 2093-00
Jag 340/440/Dlx .750 15x121 .875 72/96 Switch-Back 6” 2077-00
Panther 340 .750 15x136 .875 108 Switch-Back 6” 2077-00
Panther 440 .750 15x136 .875 108 Switch-Back 6” 2077-00
Panther 550 .750 15x136 .875 108/135 Switch-Back 6” 2077-00
Pantera 580 .750 15x136 .875 108/135 G-Force 9” 2094-00
Pantera 800 .750 15x136 .875 162 G-Force 9” 2094-00
Powder Special 500/EFI 1.400 15x136 na na Switch-Back 6” 2093-00
Powder Special 600/EFI 2.000 15x136 na na Switch-Back 6” 2093-00
Powder Special 700 2.000 15x136 na na Switch-Back 6” 2093-00
Thundercat .850 15x121 1.080 192/240 G-Force 9” 2094-00
Thundercat MC 2.000 15x136 na na G-Force 9” 2094-00
Triple Touring 600 .750 15x136 .960 144/168 G-Force 9” 2094-00
Z 370 .750 15x121 .960 96/120 Switch-Back 6” 2077-00
Z 440 .750 15x121 .960 96/120 Switch-Back 6” 2093-00
ZL 440 .750 15x121 .960 96/120 Switch-Back 6” 2093-00
ZL 500 / EFI .750 15x121 .960 120/144 Switch-Back 6” 2093-00
ZL 600 / EFI .750 15x121 1.000 120/144 G-Force 9” 2094-00
ZR 500 /EFI .850 15x121 1.000 / 1.080 120/144 G-Force 9” 2094-00
ZR 600/EFI .850 15x121 1.000 / 1.080 120/144 G-Force 9” 2094-00
ZR 700 .850 15x121 1.000 / 1.080 168/192 G-Force 9” 2094-00
ZRT 600 .850 15x121 1.000 / 1.080 192 G-Force 9” 2094-00
ZRT 800 .850 15x121 1.000 / 1.080 192/240 G-Force 9” 2094-00

*121” Tracks Have 48 Lugs / 136” Tracks Have 54 Lugs / 156” Tracks Have 62 Lugs

SB 6" = SWITCH BACK 6 "
GF 9" = G-FORCE 9"

Liberty Products, Inc. recommends that tunnel and/or heat exchanger protection be installed in all snowmobiles when traction products are utilized. Even if your snowmobile is equipped with factory tunnel protection we suggest that you check for adequate clearance of traction products before you ride. Riding without performing a clearance check can result in serious damage to your snowmobile. Stud quantity and carbide length must be balanced for safe and proper handling. If you are not using studs do not install overly aggressive wearbars. We recommend our “Super-Stock” or “Switch-Back” series.

 

 
   

 

Phone (231)853-2323     /     Fax (231)-853-8012

Mailing Address - Liberty Products Inc. P.O. Box 338 Ravenna, MI  49451-0338

Street Address - Liberty Products Inc. 3073 Mortimer  Ravenna, MI  49451-0338

© 2008 All Rights Reserved